Contour Logo

Documentation

Introduction

Configuration

Deployment

Guides

Troubleshooting

Resources

Security

Contribute

Introduction

Gateway API is an open source project managed by the Kubernetes SIG-NETWORK community. The project’s goal is to evolve service networking APIs within the Kubernetes ecosystem. Gateway API consists of multiple resources that provide user interfaces to expose Kubernetes applications- Services, Ingress, and more.

This guide covers using version v1beta1 of the Gateway API, with Contour v1.22.0 or higher.

Background

Gateway API targets three personas:

  • Platform Provider: The Platform Provider is responsible for the overall environment that the cluster runs in, i.e. the cloud provider. The Platform Provider will interact with GatewayClass resources.
  • Platform Operator: The Platform Operator is responsible for overall cluster administration. They manage policies, network access, application permissions and will interact with Gateway resources.
  • Service Operator: The Service Operator is responsible for defining application configuration and service composition. They will interact with HTTPRoute and TLSRoute resources and other typical Kubernetes resources.

Gateway API contains three primary resources:

  • GatewayClass: Defines a set of gateways with a common configuration and behavior.
  • Gateway: Requests a point where traffic can be translated to a Service within the cluster.
  • HTTPRoute/TLSRoute: Describes how traffic coming via the Gateway maps to the Services.

Resources are meant to align with personas. For example, a platform operator will create a Gateway, so a developer can expose an HTTP application using an HTTPRoute resource.

Prerequisites

The following prerequisites must be met before using Gateway API with Contour:

Deploying Contour with Gateway API

Contour supports two modes of provisioning for use with Gateway API: static and dynamic.

In static provisioning, the platform operator defines a Gateway resource, and then manually deploys a Contour instance corresponding to that Gateway resource. It is up to the platform operator to ensure that all configuration matches between the Gateway and the Contour/Envoy resources. With static provisioning, Contour can be configured with either a controller name, or a specific gateway (see the API documentation.) If configured with a controller name, Contour will process the oldest GatewayClass, its oldest Gateway, and that Gateway's routes, for the given controller name. If configured with a specific gateway, Contour will process that Gateway and its routes.

In dynamic provisioning, the platform operator first deploys Contour’s Gateway provisioner. Then, the platform operator defines a Gateway resource, and the provisioner automatically deploys a Contour instance that corresponds to the Gateway's configuration and will process that Gateway and its routes.

Static provisioning may be more appropriate for users who prefer the traditional model of deploying Contour, have just a single Contour instance, or have highly customized YAML for deploying Contour. Dynamic provisioning may be more appropriate for users who want a simple declarative API for provisioning Contour instances.

Option #1: Statically provisioned

Create Gateway API CRDs:

$ kubectl apply -f https://raw.githubusercontent.com/projectcontour/contour/release-1.23/examples/gateway/00-crds.yaml

Create a GatewayClass:

kubectl apply -f - <<EOF
kind: GatewayClass
apiVersion: gateway.networking.k8s.io/v1beta1
metadata:
  name: contour
spec:
  controllerName: projectcontour.io/gateway-controller
EOF

Create a Gateway in the projectcontour namespace:

kubectl apply -f - <<EOF
kind: Namespace
apiVersion: v1
metadata:
  name: projectcontour
---
kind: Gateway
apiVersion: gateway.networking.k8s.io/v1beta1
metadata:
  name: contour
  namespace: projectcontour
spec:
  gatewayClassName: contour
  listeners:
    - name: http
      protocol: HTTP
      port: 80
      allowedRoutes:
        namespaces:
          from: All
EOF

Deploy Contour:

$ kubectl apply -f https://projectcontour.io/quickstart/contour.yaml

This command creates:

  • Namespace projectcontour to run Contour
  • Contour CRDs
  • Contour RBAC resources
  • Contour Deployment / Service
  • Envoy DaemonSet / Service
  • Contour ConfigMap

Update the Contour configmap to enable Gateway API processing by specifying a gateway controller name, and restart Contour to pick up the config change:

kubectl apply -f - <<EOF
kind: ConfigMap
apiVersion: v1
metadata:
  name: contour
  namespace: projectcontour
data:
  contour.yaml: |
    gateway:
      controllerName: projectcontour.io/gateway-controller
EOF

kubectl -n projectcontour rollout restart deployment/contour

See the next section ( Testing the Gateway API) for how to deploy an application and route traffic to it using Gateway API!

Option #2: Dynamically provisioned

Deploy the Gateway provisioner:

$ kubectl apply -f https://projectcontour.io/quickstart/contour-gateway-provisioner.yaml

This command creates:

  • Namespace projectcontour to run the Gateway provisioner
  • Contour CRDs
  • Gateway API CRDs
  • Gateway provisioner RBAC resources
  • Gateway provisioner Deployment

Create a GatewayClass:

kubectl apply -f - <<EOF
kind: GatewayClass
apiVersion: gateway.networking.k8s.io/v1beta1
metadata:
  name: contour
spec:
  controllerName: projectcontour.io/gateway-controller
EOF

Create a Gateway:

kubectl apply -f - <<EOF
kind: Gateway
apiVersion: gateway.networking.k8s.io/v1beta1
metadata:
  name: contour
  namespace: projectcontour
spec:
  gatewayClassName: contour
  listeners:
    - name: http
      protocol: HTTP
      port: 80
      allowedRoutes:
        namespaces:
          from: All
EOF

The above creates:

  • A GatewayClass named contour controlled by the Gateway provisioner (via the projectcontour.io/gateway-controller string)
  • A Gateway resource named contour in the projectcontour namespace, using the contour GatewayClass
  • Contour and Envoy resources in the projectcontour namespace to implement the Gateway, i.e. a Contour deployment, an Envoy daemonset, an Envoy service, etc.

See the next section ( Testing the Gateway API) for how to deploy an application and route traffic to it using Gateway API!

Testing the Gateway API

Deploy the test application:

$ kubectl apply -f https://raw.githubusercontent.com/projectcontour/contour/release-1.23/examples/example-workload/gatewayapi/kuard/kuard.yaml

This command creates:

  • A Deployment named kuard in the default namespace to run kuard as the test application.
  • A Service named kuard in the default namespace to expose the kuard application on TCP port 80.
  • An HTTPRoute named kuard in the default namespace, attached to the contour Gateway, to route requests for local.projectcontour.io to the kuard service.

Verify the kuard resources are available:

$ kubectl get po,svc,httproute -l app=kuard
NAME                         READY   STATUS    RESTARTS   AGE
pod/kuard-798585497b-78x6x   1/1     Running   0          21s
pod/kuard-798585497b-7gktg   1/1     Running   0          21s
pod/kuard-798585497b-zw42m   1/1     Running   0          21s

NAME            TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)   AGE
service/kuard   ClusterIP   172.30.168.168   <none>        80/TCP    21s

NAME                                        HOSTNAMES
httproute.gateway.networking.k8s.io/kuard   ["local.projectcontour.io"]

Test access to the kuard application:

Note, for simplicity and compatibility across all platforms we’ll use kubectl port-forward to get traffic to Envoy, but in a production environment you would typically use the Envoy service’s address.

Port-forward from your local machine to the Envoy service:

# If using static provisioning
$ kubectl -n projectcontour port-forward service/envoy 8888:80

# If using dynamic provisioning
$ kubectl -n projectcontour port-forward service/envoy-contour 8888:80

In another terminal, make a request to the application via the forwarded port (note, local.projectcontour.io is a public DNS record resolving to 127.0.0.1 to make use of the forwarded port):

$ curl -i http://local.projectcontour.io:8888

You should receive a 200 response code along with the HTML body of the main kuard page.

You can also open http://local.projectcontour.io:8888/ in a browser.

Next Steps

Customizing your dynamically provisioned Contour instances

In the dynamic provisioning example, we used a default set of options for provisioning the Contour gateway. However, Gateway API also supports attaching parameters to a GatewayClass, which can customize the Gateways that are provisioned for that GatewayClass.

Contour defines a CRD called ContourDeployment, which can be used as GatewayClass parameters.

A simple example of a parameterized Contour GatewayClass that provisions Envoy as a Deployment instead of the default DaemonSet looks like:

kind: GatewayClass
apiVersion: gateway.networking.k8s.io/v1beta1
metadata:
  name: contour-with-envoy-deployment
spec:
  controllerName: projectcontour.io/gateway-controller
  parametersRef:
    kind: ContourDeployment
    group: projectcontour.io
    name: contour-with-envoy-deployment-params
    namespace: projectcontour
---
kind: ContourDeployment
apiVersion: projectcontour.io/v1alpha1
metadata:
  namespace: projectcontour
  name: contour-with-envoy-deployment-params
spec:
  envoy:
    workloadType: Deployment

All Gateways provisioned using the contour-with-envoy-deployment GatewayClass would get an Envoy Deployment.

See the API documentation for all ContourDeployment options.

Further reading

This guide only scratches the surface of the Gateway API’s capabilities. See the Gateway API website for more information.

Ready to try Contour?

Read our getting started documentation.