Contour Logo

Documentation

Introduction

Configuration

Deployment

Guides

Troubleshooting

Resources

Security

Contribute

This tutorial demonstrates how to use Gatekeeper as a validating admission controller for Contour.

Gatekeeper is a project that enables users to define flexible policies for Kubernetes resources using Open Policy Agent (OPA) that are enforced when those resources are created/updated via the Kubernetes API.

The benefits of using Gatekeeper with Contour are:

  • Immediate feedback for the user when they try to create an HTTPProxy with an invalid spec. Instead of having to check the HTTPProxy’s status after creation for a possible error message, the create is rejected and the user is immediately provided with a reason for the rejection.
  • User-defined policies for HTTPProxy specs. For example, the Contour admin can define policies to enforce maximum limits on timeouts and retries, disallow certain FQDNs, etc.

Prerequisites

  • A Kubernetes cluster with a minimum version of 1.14 (to enable webhook timeouts for Gatekeeper).
  • Cluster-admin permissions

Deploy Contour

Run:

$ kubectl apply -f https://projectcontour.io/quickstart/contour.yaml

This creates a projectcontour namespace and sets up Contour as a deployment and Envoy as a daemonset, with communication between them secured by mutual TLS.

Check the status of the Contour pods with this command:

$ kubectl -n projectcontour get pods -l app=contour
NAME                           READY   STATUS      RESTARTS   AGE
contour-8596d6dbd7-9nrg2       1/1     Running     0          32m
contour-8596d6dbd7-mmtc8       1/1     Running     0          32m

If installation was successful, all pods should reach Running status shortly.

Deploy Gatekeeper

The following instructions are summarized from the Gatekeeper documentation. If you already have Gatekeeper running in your cluster, you can skip this section.

Run:

$ kubectl apply -f https://raw.githubusercontent.com/open-policy-agent/gatekeeper/master/deploy/gatekeeper.yaml

This creates a gatekeeper-system namespace and sets up the Gatekeeper controller manager and audit deployments using the latest Gatekeeper release.

Check the status of the Gatekeeper pods with this command:

$ kubectl -n gatekeeper-system get pods
NAME                                             READY   STATUS    RESTARTS   AGE
gatekeeper-audit-67dfc46db6-kjcmc                1/1     Running   0          40m
gatekeeper-controller-manager-7cbc758844-64hhn   1/1     Running   0          40m
gatekeeper-controller-manager-7cbc758844-c4dkd   1/1     Running   0          40m
gatekeeper-controller-manager-7cbc758844-xv9jn   1/1     Running   0          40m

If installation was successful, all pods should reach Running status shortly.

Configure Gatekeeper

Background

Gatekeeper uses the OPA Constraint Framework to define and enforce policies. This framework has two key types: ConstraintTemplate and Constraint. A ConstraintTemplate defines a reusable OPA policy, along with the parameters that can be passed to it when it is instantiated. When a ConstraintTemplate is created, Gatekeeper automatically creates a custom resource definition (CRD) to represent it in the cluster.

A Constraint is an instantiation of a ConstraintTemplate, which tells Gatekeeper to apply it to specific Kubernetes resource types (e.g. HTTPProxy) and provides any relevant parameter values. A Constraint is defined as an instance of the CRD representing the associated ConstraintTemplate.

We’ll now look at some examples to make these concepts concrete.

Configure resource caching

First, Gatekeeper needs to be configured to store all HTTPProxy resources in its internal cache, so that existing HTTPProxy resources can be referenced within constraint template policies. This is essential for being able to define constraints that look across all HTTPProxies – for example, to verify FQDN uniqueness.

Create a file called config.yml containing the following YAML:

apiVersion: config.gatekeeper.sh/v1alpha1
kind: Config
metadata:
  name: config
  namespace: "gatekeeper-system"
spec:
  sync:
    syncOnly:
      - group: "projectcontour.io"
        version: "v1"
        kind: "HTTPProxy"

Apply it to the cluster:

$ kubectl apply -f config.yml

Note that if you already had Gatekeeper running in your cluster, you may already have the Config resource defined. In that case, you’ll need to edit the existing resource to add HTTPProxy to the spec.sync.syncOnly list.

Configure HTTPProxy validations

The first constraint template and constraint that we’ll define are what we’ll refer to as a validation. These are rules for HTTPProxy specs that Contour universally requires to be true. In this example, we’ll define a constraint template and constraint to enforce that all HTTPProxies must have a unique FQDN.

Create a file called unique-fqdn-template.yml containing the following YAML:

apiVersion: templates.gatekeeper.sh/v1beta1
kind: ConstraintTemplate
metadata:
  name: httpproxyuniquefqdn
spec:
  crd:
    spec:
      names:
        kind: HTTPProxyUniqueFQDN
        listKind: HTTPProxyUniqueFQDNList
        plural: HTTPProxyUniqueFQDNs
        singular: HTTPProxyUniqueFQDN
  targets:
    - target: admission.k8s.gatekeeper.sh
      rego: |
        package httpproxy.uniquefqdn

        violation[{"msg": msg, "other": sprintf("%v/%v", [other.metadata.namespace, other.metadata.name])}] {
          got := input.review.object.spec.virtualhost.fqdn
          other := data.inventory.namespace[_]["projectcontour.io/v1"]["HTTPProxy"][_]
          other.spec.virtualhost.fqdn = got

          not same(other, input.review.object)
          msg := "HTTPProxy must have a unique spec.virtualhost.fqdn"
        }

        same(a, b) {
          a.metadata.namespace == b.metadata.namespace
          a.metadata.name == b.metadata.name
        }        

Apply it to the cluster:

$ kubectl apply -f unique-fqdn-template.yml

Within a few seconds, you’ll see that a corresponding CRD has been created in the cluster:

$ kubectl get crd httpproxyuniquefqdn.constraints.gatekeeper.sh
NAME                                            CREATED AT
httpproxyuniquefqdn.constraints.gatekeeper.sh   2020-08-13T16:08:57Z

Now, create a file called unique-fqdn-constraint.yml containing the following YAML:

apiVersion: constraints.gatekeeper.sh/v1beta1
kind: HTTPProxyUniqueFQDN
metadata:
  name: httpproxy-unique-fqdn
spec:
  match:
    kinds:
      - apiGroups: ["projectcontour.io"]
        kinds: ["HTTPProxy"]

Note that the Kind of this resource corresponds to the new CRD.

Apply it to the cluster:

$ kubectl apply -f unique-fqdn-constraint.yml

Now, let’s create some HTTPProxies to see the validation in action.

Create a file called httpproxies.yml containing the following YAML:

apiVersion: projectcontour.io/v1
kind: HTTPProxy
metadata:
  name: demo
  namespace: default
spec:
  virtualhost:
    fqdn: demo.projectcontour.io
---
apiVersion: projectcontour.io/v1
kind: HTTPProxy
metadata:
  name: demo2
  namespace: default
spec:
  virtualhost:
    fqdn: demo.projectcontour.io

Note that both HTTPProxies have the same FQDN.

Apply the YAML:

$ kubectl apply -f httpproxies.yml

You should see something like:

httpproxy.projectcontour.io/demo created
Error from server ([denied by httpproxy-unique-fqdn] HTTPProxy must have a unique FQDN): error when creating "httpproxies.yml": admission webhook "validation.gatekeeper.sh" denied the request: [denied by httpproxy-unique-fqdn] HTTPProxy must have a unique FQDN

The first HTTPProxy was created successfully, because there was not already an existing proxy with the demo.projectcontour.io FQDN. However, when the second HTTPProxy was submitted, Gatekeeper rejected its creation because it used the same FQDN as the first one.

Configure HTTPProxy policies

The next constraint template and constraint that we’ll create are what we refer to as a policy. These are rules for HTTPProxy specs that an individual Contour administrator may want to enforce for their cluster, but that are not explicitly required by Contour itself. In this example, we’ll define a constraint template and constraint to enforce that all HTTPProxies can be configured with at most five retries for any route.

Create a file called retry-count-range-template.yml containing the following YAML:

apiVersion: templates.gatekeeper.sh/v1beta1
kind: ConstraintTemplate
metadata:
  name: httpproxyretrycountrange
spec:
  crd:
    spec:
      names:
        kind: HTTPProxyRetryCountRange
        listKind: HTTPProxyRetryCountRangeList
        plural: HTTPProxyRetryCountRanges
        singular: HTTPProxyRetryCountRange
      scope: Namespaced
      validation:
        openAPIV3Schema:
          properties:
            min:
              type: integer
            max: 
              type: integer
  targets:
    - target: admission.k8s.gatekeeper.sh
      rego: |
        package httpproxy.retrycountrange

        # build a set of all the retry count values
        retry_counts[val] {
          val := input.review.object.spec.routes[_].retryPolicy.count
        }

        # is there a retry count value that's greater than the allowed max?
        violation[{"msg": msg}] {
          retry_counts[_] > input.parameters.max
          msg := sprintf("retry count must be less than or equal to %v", [input.parameters.max])
        }

        # is there a retry count value that's less than the allowed min?
        violation[{"msg": msg}] {
          retry_counts[_] < input.parameters.min
          msg := sprintf("retry count must be greater than or equal to %v", [input.parameters.min])
        }        

Apply it to the cluster:

$ kubectl apply -f retry-count-range-template.yml

Again, within a few seconds, you’ll see that a corresponding CRD has been created in the cluster:

$ kubectl get crd httpproxyretrycountrange.constraints.gatekeeper.sh
NAME                                                 CREATED AT
httpproxyretrycountrange.constraints.gatekeeper.sh   2020-08-13T16:12:10Z

Now, create a file called retry-count-range-constraint.yml containing the following YAML:

apiVersion: constraints.gatekeeper.sh/v1beta1
kind: HTTPProxyRetryCountRange
metadata:
  name: httpproxy-retry-count-range
spec:
  match:
    kinds:
      - apiGroups: ["projectcontour.io"]
        kinds: ["HTTPProxy"]
    namespaces:
      - my-namespace
  parameters:
    max: 5

Note that for this Constraint, we’ve added a spec.match.namespaces field which defines that this policy should only be applied to HTTPProxies created in the my-namespace namespace. If this namespaces matcher is not specified, then the Constraint applies to all namespaces. You can read more about Constraint matchers on the Gatekeeper website.

Apply it to the cluster:

$ kubectl apply -f retry-count-range-constraint.yml

Now, let’s create some HTTPProxies to see the policy in action.

Create a namespace called my-namespace:

$ kubectl create namespace my-namespace
namespace/my-namespace created

Create a file called httpproxy-retries.yml containing the following YAML:

apiVersion: projectcontour.io/v1
kind: HTTPProxy
metadata:
  name: demo-retries
  namespace: my-namespace
spec:
  virtualhost:
    fqdn: retries.projectcontour.io
  routes:
    - conditions:
        - prefix: /foo
      services:
        - name: s1
          port: 80
      retryPolicy:
        count: 6

Apply the YAML:

$ kubectl apply -f httpproxy-retries.yml

You should see something like:

Error from server ([denied by httpproxy-retry-count-range] retry count must be less than or equal to 5): error when creating "proxy-retries.yml": admission webhook "validation.gatekeeper.sh" denied the request: [denied by httpproxy-retry-count-range] retry count must be less than or equal to 5

Now, change the count field on the last line of httpproxy-retries.yml to have a value of 5. Save the file, and apply it again:

$ kubectl apply -f httpproxy-retries.yml

Now the HTTPProxy creates successfully*.

* Note that the HTTPProxy is still marked invalid by Contour after creation because the service s1 does not exist, but that’s outside the scope of this guide.

Finally, create a file called httpproxy-retries-default.yml containing the following YAML:

apiVersion: projectcontour.io/v1
kind: HTTPProxy
metadata:
  name: demo-retries
  namespace: default
spec:
  virtualhost:
    fqdn: default.retries.projectcontour.io
  routes:
    - conditions:
        - prefix: /foo
      services:
        - name: s1
          port: 80
      retryPolicy:
        count: 6

Remember that our Constraint was defined to apply only to the my-namespace namespace, so it should not block the creation of this proxy, even though it has a retry policy count outside the allowed range.

Apply the YAML:

$ kubectl apply -f httpproxy-retries-default.yml

The HTTPProxy creates successfully.

Gatekeeper Audit

We’ve seen how Gatekeeper constraints can enforce constraints when a user tries to create a new HTTPProxy. Now let’s look at how constraints can be applied to pre-existing resources in the cluster.

Gatekeeper has an audit functionality, that periodically (every 60s by default) checks all existing resources against the relevant set of constraints. Any violations are reported in the Constraint custom resource’s status.violations field. This allows an administrator to periodically review & correct any pre-existing misconfigurations, while not having to worry about breaking existing resources when rolling out a new or updated constraint.

To try this out, let’s revisit the previous example, and change our constraint to allow a maximum retry count of four.

Edit retry-count-range-constraint.yml and change the max field to have a value of 4. Save the file.

Apply it to the cluster:

$ kubectl apply -f retry-count-range-constraint.yml

We know that the demo-retries proxy has a route with a retryPolicy.count of 5. This should now be invalid according to the updated constraint.

Wait up to 60s for the next periodic audit to finish, then run:

$ kubectl describe httpproxyretrycountrange httpproxy-retry-count-range

You should see something like:

...
Status:
    ...
    Violations:
        Enforcement Action:  deny
        Kind:                HTTPProxy
        Message:             retry policy count must be less than or equal to 4
        Name:                demo-retries
        Namespace:           my-namespace

However, our HTTPProxy remains in the cluster and can continue to route requests, and the user can remediate the proxy to bring it inline with the policy on their own timeline.

Next steps

Contour has a growing library of Gatekeeper constraint templates and constraints, for both validations and policies.

If you’re using Gatekeeper, we recommend that you apply all of the validations we’ve defined, since these rules are already being checked internally by Contour and reported as status errors/invalid proxies. Using the Gatekeeper constraints will only improve the user experience since users will get earlier feedback if their proxies are invalid. The validations can be found in examples/gatekeeper/validations.

You should take more of a pick-and-choose approach to our sample policies, since every organization will have different policy needs. Feel free to use any/all/none of them, and augment them with your own policies if applicable. The sample policies can be found in examples/gatekeeper/policies.

And of course, if you do develop any new constraints that you think may be useful for the broader Contour community, we welcome contributions!

Ready to try Contour?

Read our getting started documentation.