- HTTPProxy Fundamentals
- Gateway API Support
- Ingress v1 Support
- Virtual Hosts
- Inclusion and Delegation
- TLS Termination
- Upstream TLS
- Request Routing
- External Service Routing
- Request Rewriting
- Upstream Health Checks
- Client Authorization
- TLS Delegation
- Rate Limiting
- Access logging
- Cookie Rewriting
- Overload Manager
- JWT Verification
- IP Filtering
- Annotations Reference
- Slow Start Mode
- Tracing Support
- API Reference
- Deployment Options
- Contour Configuration
- Upgrading Contour
- Enabling TLS between Envoy and Contour
- Redeploy Envoy
- Deploying Contour on AWS with NLB
- AWS Network Load Balancer TLS Termination with Contour
- Deploying HTTPS services with Contour and cert-manager
- External Authorization Support
- FIPS 140-2 in Contour
- Using Gatekeeper with Contour
- Using Gateway API with Contour
- Global Rate Limiting
- Configuring ingress to gRPC services with Contour
- Health Checking
- Creating a Contour-compatible kind cluster
- Collecting Metrics with Prometheus
- How to Configure PROXY Protocol v1/v2 Support
- Contour/Envoy Resource Limits
- Troubleshooting Common Proxy Errors
- Envoy Administration Access
- Contour Debug Logging
- Envoy Debug Logging
- Visualize the Contour Graph
- Show Contour xDS Resources
- Profiling Contour
- Envoy Container Stuck in Unready State
- Support Policy
- Compatibility Matrix
- Contour Deprecation Policy
- Release Process
- Frequently Asked Questions
The Federal Information Processing Standard (FIPS) 140-2 publication describes United States government approved security requirements for cryptographic modules. Software that is validated by an accredited Cryptographic Module Validation Program (CVMP) laboratory can be suitable for use in applications for US governmental departments or in industries subject to US Federal regulations.
As a full application is not often tested by a CVMP laboratory, we cannot say that Contour is FIPS validated. Rather, Contour can be built and configured in a manner that adheres to the standards FIPS 140-2 establishes.
For a fully FIPS compliant deployment of Contour a few things are required:
- Contour must be compiled with a FIPS validated cryptographic module
- Envoy must be compiled with a FIPS validated cryptographic module
- Contour must be configured to use FIPS approved cryptographic algorithms
This guide will run through an example of the process for building and configuring Contour and Envoy for adherence to FIPS 140-2. Specifically, we will show how Contour and Envoy can be built with the FIPS validated BoringCrypto module of BoringSSL and configured to use FIPS approved TLS ciphers.
Please note that this guide makes no guarantees about Contour FIPS 140-2 approval, validation, or the like. Interested parties should still evaluate the processes given as example here and the suitability for their purposes. The Contour project does not have any plans to distribute any binaries compiled in the manner described by this guide.
Notes on BoringCrypto
This guide shows how Contour and Envoy can be built with BoringSSL as the cryptographic module. BoringSSL is Google’s fork of OpenSSL and as a whole is not FIPS validated, but a specific core library called BoringCrypto is. For more detailed information about BoringCrypto see this document.
We are using BoringSSL/BoringCrypto in this example because Contour is written in Go and there is an open source BoringCrypto flavor of Go readily available. In addition, Envoy uses BoringSSL at its core and already has well defined build processes for building in a FIPS compliant mode.
One could possibly perform the same sort of operations with another library with FIPS 140-2 a validated cryptographic module (e.g. OpenSSL). However, that is out of the scope of this guide and interested users will have to come up with their own solutions for that use case, possibly using this document as a template.
In this section we will describe how the
projectcontour/contour container image can be compiled and linked to BoringCrypto for FIPS compliance.
We will be modifying the standard build process by setting up some dependencies and passing additional arguments to the same
make target used to build the standard, non-FIPS image distributed by the project.
You will need some software downloaded and installed on the computer you are performing the Contour FIPS build on:
Dockerfile uses a multistage build that performs compilation in an image that contains the necessary build tools and dependencies and then exports compiled artifacts to a final image.
In order to minimize the
projectcontour/contour image footprint, the final output image only consists of a single layer, containing a lone file: the statically compiled
The standard Contour build uses the upstream
golang image as a build base, however we will have to swap that out to build Contour with BoringCrypto.
Go 1.19 and higher
Starting with Go 1.19, you can simply add
BUILD_GOEXPERIMENT=boringcrypto and some related arguments to enable integrating BoringCrypto for standard Go.
make container \
Go 1.18 and lower
For the Go version under 1.19, we can use the Google-provided Go implementation that has patches on top of standard Go to enable integrating BoringCrypto.
This is available to us in the
goboring/golang container image we can use as a build base.
Note that the latest version of
goboring/golang image on the Docker hub is
1.16.7b7, find more versions
here and pull the images on Google Artifact Registry following
In addition, to ensure we can statically compile the
contour binary when it is linked with the BoringCrypto C library, we must pass some additional arguments to the
make container target.
To perform the Contour image build with BoringCrypto, change directories to where you have the Contour source code checked out and run the following (replacing
<goboring-version-tag> with the appropriate version of Go and BoringCrypto, see
here for version specifics):
make container BUILD_CGO_ENABLED=1 BUILD_BASE_IMAGE=goboring/golang:<goboring-version-tag> BUILD_EXTRA_GO_LDFLAGS="-linkmode=external -extldflags=-static"
The command above can be broken down as follows:
make containerinvokes the container image build target
cgois enabled in the Contour compilation process
BUILD_BASE_IMAGE=goboring/golang:<goboring-version-tag>ensures we use the BoringCrypto flavor of Go
BUILD_EXTRA_GO_LDFLAGScontains the additional linker flags we need to perform a static build
-linkmode=externaltells the Go linker to use an external linker
-staticflag to the external link to ensure a statically linked executable is produced
The container image build process should fail before export of the
contour binary to the final image if the compiled binary is not statically linked.
To be fully sure the produced
contour binary has been compiled with BoringCrypto you must remove the
-s flag from the base Contour
Makefile to stop stripping symbols and run through the build process above.
Then you will be able to inspect the
contour binary with
go tool nm to check for symbols containing the string
Also, you can use the program
rsc.io/goversion. It will report the crypto implementation used by a given binary when invoked with the
Once you have a
projectcontour/contour image built, you can re-tag it if needed, push the image to a registry, and reference it in a Contour deployment to use it!
Envoy has support for building in a FIPS compliant mode as documented here. The upstream project does not distribute a FIPS compliant Envoy container image, but combining the documented process with the processes for building the Envoy executable and container image, we can produce one.
Again we will need the Envoy source code checked out to the version to build and Docker installed on your computer. The simplest way to build Envoy without having to learn Bazel and set up a C++ toolchain on your computer is to build using the Envoy build container image which contains the necessary tools pre-installed. Note that if you do build with FIPS mode outside of the build container, you can only do so on a Linux-amd64 architecture.
We can first compile the Envoy binary by running the following in a
bash shell from the Envoy source directory:
BAZEL_BUILD_EXTRA_OPTIONS="--define boringssl=fips" ENVOY_DOCKER_BUILD_DIR=<envoy-output-dir> ./ci/run_envoy_docker.sh './ci/do_ci.sh bazel.release //test/exe:envoy_static_test'
This command mimics the Envoy release CI process with the target
bazel.release but differs in only running a single test for brevity. You may omit the
//test/exe:envoy_static_test test entirely to run the full suite of Envoy tests.
<envoy-output-dir> with a directory you would like the build output to be placed on your host computer.
Once that build completes, you should have a file named
release.tar.zst in your specified output directory.
This file is a
Zstandard compressed archive containing the compiled Envoy release and debug binaries.
If you would like to build an image with Envoy according to your own specifications, you can unpack the resulting archive and you will find a stripped Envoy binary in the root and an unstripped Envoy binary with debug info in the
To build an image matching the canonical Envoy upstream release image (
envoyproxy/envoy), run the following:
Note: You will need a recent version of Docker/BuildKit that supports Zstandard decompression.
# Make ./linux/amd64 directories.
mkdir -p ./linux/amd64
# Copy Zstandard archive from build step.
cp -a <envoy-output-dir>/envoy/x64/bin/release.tar.zst ./linux/amd64/release.tar.zst
# Run the Docker image build.
docker build -f ./ci/Dockerfile-envoy --target envoy .
Once you have an image built, you can tag it as needed, push the image to a registry, and use it in an Envoy deployment.
Configuring TLS Ciphers
Now that we have Contour and Envoy compiled with BoringCrypto, we can turn our attention to ensuring encrypted communication paths in Contour are configured to use FIPS approved cryptographic algorithms. Using a FIPS flavor of Envoy will do most of the heavy lifting here without any user configuration needed.
The critical communication paths and how they are set up to be FIPS compliant are enumerated below:
- Contour -> k8s API
- Contour uses
client-goto communicate with the k8s API
client-gouses the default Golang cipher suites configuration
- When compiled with BoringCrypto Go, this set of ciphers is FIPS compliant and not configurable by users
- Contour uses
- Envoy -> Contour xDS Server, extension services, upstream services
- A FIPS compliant build of Envoy will choose FIPS approved TLS ciphers when negotiating TLS 1.2 as documented here
- The set of ciphers is not configurable
- TLS client -> Envoy