- HTTPProxy Fundamentals
- Ingress v1 Support
- Virtual Hosts
- Inclusion and Delegation
- TLS Termination
- Upstream TLS
- Request Routing
- External Service Routing
- Request Rewriting
- Upstream Health Checks
- Client Authorization
- TLS Delegation
- Rate Limiting
- Access logging
- Cookie Rewriting
- Overload Manager
- JWT Verification
- IP Filtering
- Annotations Reference
- Slow Start Mode
- Tracing Support
- API Reference
- Deployment Options
- Contour Configuration
- Upgrading Contour
- Enabling TLS between Envoy and Contour
- Redeploy Envoy
- Deploying Contour on AWS with NLB
- AWS Network Load Balancer TLS Termination with Contour
- Deploying HTTPS services with Contour and cert-manager
- External Authorization Support
- FIPS 140-2 in Contour
- Using Gatekeeper with Contour
- Using Gateway API with Contour
- Global Rate Limiting
- Configuring ingress to gRPC services with Contour
- Health Checking
- How to enable structured JSON logging
- Creating a Contour-compatible kind cluster
- Collecting Metrics with Prometheus
- How to Configure PROXY Protocol v1/v2 Support
- Contour/Envoy Resource Limits
- Envoy Administration Access
- Contour Debug Logging
- Envoy Debug Logging
- Visualize the Contour Graph
- Show Contour xDS Resources
- Profiling Contour
- Contour Operator
- Envoy Container Stuck in Unready State
- Support Policy
- Compatibility Matrix
- Contour Deprecation Policy
- Release Process
- Frequently Asked Questions
Enabling TLS between Envoy and Contour
This document describes the steps required to secure communication between Envoy and Contour.
The outcome of this is that we will have two Secrets available in the
- contourcert: contains Contour’s keypair which is used for serving TLS secured gRPC, and the CA’s public certificate bundle which is used for validating Envoy’s client certificate.
Contour’s certificate must be a valid certificate for the name
contourin order for this to work. This is currently hardcoded by Contour.
- envoycert: contains Envoy’s keypair which used as a client for connecting to Contour, and the CA’s public certificate bundle which is used for validating Contour’s server certificate.
Note that both Secrets contain a copy of the CA certificate bundle under the
ca.crt data key.
Ways you can get the certificates into your cluster
- Deploy the Job from
This will run
contour certgen --kube --secrets-format=compactfor you.
contour certgen --kubelocally.
- Run the manual procedure below.
Caveats and warnings
Be very careful with your production certificates!
This is intended as an example to help you get started. For any real deployment, you should carefully manage all the certificates and control who has access to them. Make sure you don’t commit them to any git repositories either.
Manual TLS certificate generation process
Generating a CA keypair
First, we need to generate a keypair:
$ openssl req -x509 -new -nodes \ -keyout certs/cakey.pem -sha256 \ -days 1825 -out certs/cacert.pem \ -subj "/O=Project Contour/CN=Contour CA"
Then, the new CA key will be stored in
certs/cakey.pem and the cert in
Generating Contour’s keypair
Next, we need to generate a keypair for Contour. First, we make a new private key:
$ openssl genrsa -out certs/contourkey.pem 2048
Then, we create a CSR and have our CA sign the CSR and issue a certificate.
This uses the file
certs/cert-contour.ext, which ensures that at least one of the valid names of the certificate is the bareword
This is required for the handshake to succeed, as
contour bootstrap configures Envoy to pass this as the SNI server name for the connection.
$ openssl req -new -key certs/contourkey.pem \ -out certs/contour.csr \ -subj "/O=Project Contour/CN=contour" $ openssl x509 -req -in certs/contour.csr \ -CA certs/cacert.pem \ -CAkey certs/cakey.pem \ -CAcreateserial \ -out certs/contourcert.pem \ -days 1825 -sha256 \ -extfile certs/cert-contour.ext
At this point, the contour certificate and key are in the files
Generating Envoy’s keypair
Next, we generate a keypair for Envoy:
$ openssl genrsa -out certs/envoykey.pem 2048
Then, we generate a CSR and have the CA sign it:
$ openssl req -new -key certs/envoykey.pem \ -out certs/envoy.csr \ -subj "/O=Project Contour/CN=envoy" $ openssl x509 -req -in certs/envoy.csr \ -CA certs/cacert.pem \ -CAkey certs/cakey.pem \ -CAcreateserial \ -out certs/envoycert.pem \ -days 1825 -sha256 \ -extfile certs/cert-envoy.ext
Like the Contour certificate, this CSR uses the file certs/cert-envoy.ext. However, in this case, there are no special names required.
Putting the certificates in the cluster
Next, we create the required Secrets in the target Kubernetes cluster:
$ kubectl create secret -n projectcontour generic contourcert \ --from-file=tls.key=./certs/contourkey.pem \ --from-file=tls.crt=./certs/contourcert.pem \ --from-file=ca.crt=./certs/cacert.pem \ --save-config $ kubectl create secret -n projectcontour generic envoycert \ --from-file=tls.key=./certs/envoykey.pem \ --from-file=tls.crt=./certs/envoycert.pem \ --from-file=ca.crt=./certs/cacert.pem \ --save-config
Note that we don’t put the CA key into the cluster, there’s no reason for that to be there, and that would create a security problem.
Eventually the certificates that Contour and Envoy use will need to be rotated. The following steps can be taken to replace the certificates that Contour and Envoy are using:
- Generate a new keypair for both Contour and Envoy (optionally also for the CA)
- Update the Secrets that hold the gRPC TLS keypairs
- Contour and Envoy will automatically rotate their certificates after mounted secrets have been updated by the kubelet
The secrets can be updated in-place by running:
$ kubectl create secret -n projectcontour generic contourcert \ --from-file=tls.key=./certs/contourkey.pem \ --from-file=tls.crt=./certs/contourcert.pem \ --from-file=ca.crt=./certs/cacert.pem \ --dry-run -o json \ | kubectl apply -f - $ kubectl create secret -n projectcontour generic envoycert \ --from-file=tls.key=./certs/envoykey.pem \ --from-file=tls.crt=./certs/envoycert.pem \ --from-file=ca.crt=./certs/cacert.pem \ --dry-run -o json \ | kubectl apply -f -
There are few preconditions that need to be met before Envoy can automatically reload certificate and key files:
- Envoy must be version v1.14.1 or later
- The bootstrap configuration must be generated with
contour bootstrapusing the
--resources-dirargument, see examples/contour/03-envoy.yaml
Rotate using the contour-certgen job
When using the built-in Contour certificate generation, the following steps can be used:
- Delete the contour-certgen job
kubectl delete job contour-certgen -n projectcontour
- Reapply the contour-certgen job from certgen.yaml
Once this process is done, the certificates will be present as Secrets in the
projectcontour namespace, as required by